AH-series in-line oil cooler
Compressor runs on your vehicle's hydraulic circuit
AH-series compressors with an in-line oil cooler
Pressure gauge
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor.
Naili has developed the AH series especially for mobile applications where electricity is not available, but hydraulics is.
By replacing the electric motor for an hydraulically driven motor, it is possible to have the compressor run along with the hydraulic circuit of your vehicle.
The compressors in the AH series are standard built on a frame. Therefore, you can easily install them.
Depending on the available pressure and flow of hydraulics, it is to be determined which type of motor should be installed. This should be tailored in all situations. Please consult your dealer about this.
Available in 8 or 10 bar
Assemble item code
Naili | NA | ||||
Series | AH | ||||
kW | 3 | 4 | 5.5 | 7.5 | 11 |
Bar | 8 | 10 |
For example, the article code is: NA-AH5.5-10
Flow rate in m³/min
8 bar
Flow | Power on the shaft | Hydraulic capacity | Speed | |
---|---|---|---|---|
Unit | m³/min | kW | L/min at 200 bar | RPM |
3 kW | 0.36 | 2.81 | 10.03 | 1410 |
4 kW | 0.70 | 4.82 | 17.12 | 1440 |
5.5 kW | 0.85 | 5.67 | 20.00 | 1440 |
7.5 kW | 1.38 | 8.77 | 31.04 | 1440 |
11 kW | 1.96 | 12.84 | 45.42 | 1460 |
10 bar
Flow | Power on the shaft | Hydraulic capacity | Speed | |
---|---|---|---|---|
Unit | m³/min | kW | L/min at 200 bar | RPM |
3 kW | 0.32 | 2.58 | 9.24 | 1410 |
4 kW | 0.53 | 4.17 | 14.72 | 1440 |
5.5 kW | 0.76 | 5.84 | 20.64 | 1440 |
7.5 kW | 1.12 | 8.69 | 30.72 | 1440 |
11 kW | 1.71 | 12.86 | 45.42 | 1460 |
Also available with in-line oil cooler
AH-series external oil cooler
Naili has developed the AH series especially for mobile applications where electricity is not available, but hydraulics is.
By replacing the electric motor for an hydraulically driven motor, it is possible to have the compressor run along with the hydraulic circuit of your vehicle.