AH-series external oil cooler
COMPRESSOR RUNS WITH YOUR VEHICLE'S HYDRAULIC CIRCUIT
AH-series compressor with external oil cooler
Pressure gauge
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor.
Naili has developed the AH series especially for mobile applications where electricity is not available, but hydraulics is.
By replacing the electric motor for an hydraulically driven motor, it is possible to have the compressor run along with the hydraulic circuit of your vehicle.
The compressors in the AH series are standard built on a frame. Therefore, you can easily install them.
Optionally, you can integrate an aftercooler for the compressed air in addition to the oil cooling. By post-cooling the compressed air, a large part of the moisture present condenses.
Available in 8 or 10 bar
Assemble item code
| Naili | NA | |||
| Series | AH | |||
| kW | 15 | 18.5 | 22 | 30 |
| Bar | 8 | 10 |
Flow rate in m³/min
8 bar
| Flow | Power on the shaft | Hydraulic capacity | Speed | |
|---|---|---|---|---|
| Unit | m³/min | kW | L/min at 200 bar | RPM |
| 15 kW | 2.70 | 17.50 | 61.97 | 1460 |
| 18.5 kW | 3.27 | 21.30 | 75.30 | 1470 |
| 22 kW | 3.75 | 23.90 | 84.44 | 1470 |
| 30 kW | 5.62 | 34.5 | 121.85 | 1480 |
10 bar
| Flow | Power on the shaft | Hydraulic capacity | Speed | |
|---|---|---|---|---|
| Unit | m³/min | kW | L/min at 200 bar | RPM |
| 15 kW | 2.20 | 16.70 | 59.05 | 1460 |
| 18.5 kW | 2.64 | 19.50 | 68.93 | 1470 |
| 22 kW | 3.20 | 23.70 | 83.79 | 1470 |
| 30 kW | 4.66 | 33.50 | 118.00 | 1480 |
Also available with in-line oil cooler
AH-series in-line oil cooler
Naili has developed the AH series especially for mobile applications where electricity is not available, but hydraulics is.
By replacing the electric motor for an hydraulically driven motor, it is possible to have the compressor run along with the hydraulic circuit of your vehicle.
English 
Dutch